The Functions / Values / Options:

(Depending on the engine, the functions vary)

• Automatic / manual brightness control
• Full graphic touch display with 65536 colors
• Boat image changeable
• OBD2-Blocking function (only unlockable via chosen code!)
• Enable diagnostics (OBD2) via disabling-function of the DataDisplay
• Color setup freely adjustable (for example, oil temperature red, yellow and green is displayed)
• Torque Offset (if the real value should not match the ECU value)
• Read / Delete ECU Errorcodes
• Shiftlight (Display via image on the DataDisplay and / or indicator in the instrument cluster)
• Max values (stored) - erasable
• Save and start with the last page
• Delete - R (F-Series suppress the catalyst warning)
• Torque
• Power
• Speed (Synchronization via GPS This makes time measurements very accurate)
• Water temperature
• Oil temperature
• Gearbox temperatur (For all vehicles with automatic or DKG - E-series and F-series!)
• Battery voltage
• Boost (Target-value)
• Boost (Source-value)
• Wastegate position (WGDC)
• Charge air temperature (IAT)
• Airmass
• Ignition angle
• Injection time
• Lambda value
• Railpressure
• Fuelpressure
• Exhaust temperature (calculated by ECU)
• Oilpressure (F-Series or E-Serie (N55) or other with external sensor)
• DPF differential pressure
• Pressure befire DPF
• Soot DPF
• Oil ash DPF
• Distance since the last successful regeneration DPF
• time measurements 0-100 kmh / 0-60 mph(shows gearshift time - manual gearbox)
• time measurements 100-200 kmh / 60-140 mph (shows gearshift time - manual gearbox)
• time measurements 1/4 Mile (incl. display of average acceleration) (shows gearshift time - manual gearbox)
• time measurements 1/2 Mile (incl. display of average acceleration) (shows gearshift time - manual gearbox)
• time measurements 1/8 Mile (incl. display of average acceleration) (shows gearshift time - manual gearbox)
• Freely selectable speed for time measurement
• Laptimer (Display distance and time) (shows gearshift time - manual gearbox)
• G-Force Longtitude / Latitude
• Soundtuning on/off (F-Series function - switch off exhaust burble)
• Active Sound Design on/off (F-Series function - Fake engine sound from speakers)
• Exhaustflap control
• Gauge sweep (needle sweep when ignition on)
• Optional connectable sensors (Oil temperature, Oil pressure, Exhaust temperature, ...)
• Dashboard with 8 freely selectable values (Water and Oil temperature always on top)
• DSC / DTC switchable with the vehicle starting on request (E-Series function)
• Relay-Control: Up to 4 relays can be switched which can control pumps, injections, etc.
• Compensating scaled maps for N54 Engines (Boost > 1.5 Bar)
• Switching the language and units (English, German, Italian, French, Dutch (on request further), units such as Bar-PSI, PS-KW, Lambda-AFR, ° C- ° F, etc ...)
• Save the last 4 times (for all time measurements)
• Up to 4 freely selectable parameters to display in a diagram
• Freely selectable values displayed as value and bar graph (Up to 3)
• Continuous development of functions and style
• Exhaust flap control via MFL buttons (Steering wheel buttons)