If the DataDisplay is locked for the first time, a PIN must be assigned.

If the PIN has been forgotten or something went wrong, the PIN can also be reset via the USB connection (factory setting is executed).

DOWNLOAD TYCOMMANDER

 

Connect the DataDisplay to a Windows device and start the TyCommander.

If the controller is not displayed (picture number 1) the driver is probably missing.

DOWNLOAD CONTROLLER TREIBER

 

 

 

2: Serial must be activated

3: Switch to the Serial tab

4: Enter the command "reset"

5: Press the "Send" button.

 

The DataDisplay has now been reset to factory settings.

If activation is missing, the activation code is printed on the controller.